This is a public Forum  public

Posts

  • Lanny Robinson
    I have a new fx555 brush cutter that when started runs near...
    Service & Maintenance Question posted June 21, 2016 by Lanny Robinson 
    Question:
    I have a new fx555 brush cutter that when started runs near wide open. Throttle has no affect. Took it to an authorized service center and they have had it 5 weeks and still are stumbling around trying to locate the problem for an estimate to repair. They reported the husqvarna representative has even weighed in on the problem but was no help. I think we all know it's sucking in air from somewhere but I'm a little dumbfounded that the service center cannot test for the leak. Air leaks are a simple thing to find on most any 2'cycles but not this one. Any ideas as to who in Georgia can do the necessary test(s) to locate the air leak?
  • jaison chiponda
    I bought 2 husqarva brushcutter R236 in february this year...
    Service & Maintenance Question posted June 19, 2016 by jaison chiponda 
    Question:
    I bought 2 husqarva brushcutter R236 in february this year 2016 and within 4months its having shaft and gear box problems.
    What can i do to fix them cause the retailers here are telling me a hell some of money to fix?
    And do they have no guarantee or waranty and yet they are so expensive 7000
  • James Jamieson
    model 128 RJ trimmer will not hold the prime in the priming...1
    Service & Maintenance Question posted May 8, 2016 by James Jamieson 
    Question:
    model 128 RJ trimmer will not hold the prime in the priming bulb idles good but when I use the throttle it quits loss of power or fuel what do I need to do to correct this problem, should be a easy fix
  • Jeff Lassek
    I recently purchased a Husqvarna 327RJX Trimmer. I also...
    Warranty Question posted March 20, 2016 by Jeff Lassek 
    Question:
    I recently purchased a Husqvarna 327RJX Trimmer. I also bought the 96OZ of Pre-mixed fuel at the same time, on the same receipt. I have registered my purchase on the Husqvarna site and it shows that the registration is "SOLVED". But I never received a confirmation that my Warranty has been doubled to the 4 years from the standard 2 years. How can I find out if my warranty is, in fact, 4 years now? Thanks
  • Bill Cahoy
    What became of the 323R Brushcutter? It looks like the unit...
    General Product Question posted June 8, 2015 by Bill Cahoy 
    Question:
    What became of the 323R Brushcutter? It looks like the unit for me but it's not on the site. Is it correct that it has a little more power than the 223 and cuts through thicker saplings. Correct?
  • Canaan Morse
    My family farm owns an H235r brushcutter that was made in...escalated
    Service & Maintenance Question posted September 4, 2014 by Canaan Morse 
    Question:
    My family farm owns an H235r brushcutter that was made in the 90's. I started it up for the first time this year, and, because it bogged out immediately after starting, replaced the fuel and cleaned the carburetor thoroughly. It now starts and runs fine, but when I shut it off, I get smoke coming out of the exhaust for at least 45 seconds afterward.

    Is this a problem, and if so, what should I focus on when troubleshooting? A definitive answer would be nice; my local Husqvarna dealer charges more per hour than I can afford, and I can work on the engine in my shop at home.
  • betty Sexton
    How do I hook up fuel lines to 323rescalated
    Parts Question posted July 26, 2014 by betty Sexton 
    Question:
    How do I hook up fuel lines to 323r
    Details:
    All I know is they were taken off to replace part and not sure how they go back on
    Photo:
  • Paul Gehl
    posted a question in January about part number 544018701. so...escalated
    General Product Question posted February 11, 2014 by Paul Gehl 
    Question:
    posted a question in January about part number 544018701. so far no answer. my dealer has been working with his distirbuter . distributer has been in contact with husqvana. so far we have not received any answers or comments . it seems like we are being ignored.
  • jay brower
    Is there a brushcutter blade for the 129c model?
    Parts Question posted January 17, 2017 by jay brower 
    Question:
    Is there a brushcutter blade for the 129c model?
  • Zack Cheatwood
    I have a wheeled brush trimmer, model HU625hwt, and I'm...1
    Parts Question posted July 8, 2018 by Zack Cheatwood 
    Question:
    I have a wheeled brush trimmer, model HU625hwt, and I'm having an issue finding a part for it. The trimmer rolled out of the back of my truck as i was moving my truck to the shop and broke this plastic piece on the axle. I found my trimmers parts manual online, but i'm just not seeing that specific piece? Everything else seems to be fine and intact so i just need to replace this once piece to get it back going again. Any help would be greatly appreciated. I provided a link to the parts manual and a picture of the damaged wheel trimmer. Thanks again.
    Details:

    Link to the parts manual./pdf/documents/HUSI/HUSI2013_NAen/HUSI2013_NAen_HU625HWT_586164227.pdf

     

     

    Photo: