Posts
General Product Question posted December 2, 2018 by James ClemensQuestion:Have a 128LDX with hedge and string trimmer attachments. Even when new, depressing the lock and attaching an accessory was difficult. I’ve used lubricants —it’s still a hit or miss task
Currently, I am unable to attach anything. It’s maybe a year old. I haven’t misused it. The design of the attachments is extremely flawed
Any ideas on how I might make just attaching accessories easier?- General Product Question posted August 25, 2018 by Harley BuffingtonQuestion:Why does my new string trimmer seem to be bogged down and won't idle?Details:This is a new trimmer it ran fine for the first tank or two of fuel. now it seems to run for a few minutes then actually gets just bogged down. It will run with the choke on but the minute you set it to idle it just shuts off. Seems like it is bound up or something. Any ideas where to start?
- General Product Question posted August 25, 2018 by Martin JayQuestion:I just purchased my Mower and Power trimmer/Blower and the store is telling me that they cannot get the Bli150 Battery that I paid for. They are saying it was replaced with Bli20 (4.0Ah) which shows less Ah then then Bli150 (4.2 Ah). I cannot find a ton of information on if this is the case. New model or whatever. Is this a cheaper battery? Should they charge me less?
Thanks,
Marty - General Product Question posted July 30, 2018 by JOe WojdylaQuestion:I have a 128cd string trimmer. New carb,plug, fuel etc....carb was adjusted and it starts fine. However in a few seconds it revs high and stops.
Have no idea, please help. - General Product Question posted June 14, 2018 by Ronald Van HoosearQuestion:Is there an option to change the hard rubber tires to pneumatic tires on the walk behind string trimmer? The hard tires do not roll over small rocks etc.
- General Product Question posted May 21, 2018 by Bob JohnsonQuestion:I have a 123L Husqvarna String Trimmer that wont start. I have installed a NEW fuel primer pump bulb, a NEW flywheel, a New ignition module, NEW Champion #RCJ7Y spark plug put in FRESH fuel, and cleaned the air filter...I checked the compression and it has 50 lbs of compression...I also checked the "on/off" switch and it is working properly
It IS getting spark to the plug....I have even "primed" the engine by putting gas directly into the spark plug hole and have even tried spraying STARTING FLUID straight into the plug hole.....Still WON'T EVEN fire briefly.....
So, if I'm getting spark, fuel and air (and 50 lbs of compression) why won't it AT LEAST fire?
The only thing I can think of is TIMING but I installed the flywheel correctly.....PLEASE HELP ASAP!!!
Can I speak to an engineer?
ALSO....What is the compression SUPPOSE to be for my trimmer?....Is 50 lbs sufficient? - General Product Question posted April 17, 2018 by Chuck RobertsQuestion:I just purchased a Husqvarna 525L trimmer and would like to attach a comfortable should strap but all of the site are for different models.
Any help on what would work would be greatly appreciated. - General Product Question posted March 9, 2018 by Jeff_290Question:I am looking at Husqvarna as a string trimmer option. I am a homeowner trying to stay in the 200-$250 price range. I have been advised to look for the labels that show they are made in Sweden. Which models are made in Sweden in my price range - if any? Also, then where are the others made? What is the difference?
Thanks,
Jeff - General Product Question posted December 28, 2017 by AJ AndersonQuestion:I bought a factory reconditioned Husqvarna model 322L string trimmer off of Amazon. The wrong owners manual was sent with the machine. I have tried finding the 322L model owners manual on the Husqvarna site but all that I can find is ones for an older design of the 322L. Not the most current design of the 322L. How can I get a .pdf of the 322L owner's manual with the most current design?
- General Product Question posted December 26, 2017 by Steve KQuestion:Is the old style PA1100 better than the new style?Details:
I was at the local Husqvarna dealer and noticed the PA1100 pole saw attachment was redesigned. I could only pull up the image on the website and could not get any information on it. This newer version looks lighter and for lack of better description, cheaper. Has anyone used the new style and would you recommend it or would I be better off buying the old version.
Photo: