Posts
General Product Question posted February 28, 2018 by Eden Marie WilsonQuestion:I just bought a used husqvarna riding mower that was advertised as a 2016 and when I got to the house to purchase it was told that he made a mistake and it was a 2014. He didn’t have the manual, but promised he would call me as soon as he found it. I tried to find it online and can’t seem to find the mower. The model is YTH2348 with the number 28956 after it. Can someone please tell me anything about this mower? What year it is and how I can get a manual?- General Product Question posted March 8, 2013 by Chris MeaderQuestion:SNOWBLOWER DRIVE SPEED TOO FAST EVEN AT LOWEST SETTING - I just purchased a ST230E snowblower. I have found that even at the lowest setting the drive speed is too fast to throw snow that is more than 2 or 3 inches deep. I purchased this assembled from Lowes and had already noticed they incorrectly hooked up the chute which I have fixed. Could they have done something else incorrectly during assembly that is causing the machine to go so fast even on the slowest setting?
- General Product Question posted January 18, 2018 by Charles GrayQuestion:I own a st151 snow blower. When I go into snow and I have the snow chute to the left or right it will turn by itself to the front of the blower. I have gone back to Lowes twice,same problem with both snow blowers. Is there a way to tighten the chute so it does not move during operation
- General Product Question last edited February 10, 2012 by David ParmeterQuestion:The trigger controlled steering on my 1830 EXLT is less than smooth. Sometimes the triggers are stuck and difficult to pull. Sometimes they seem totally in-effective, and I end up trying to steer it by pulling the handle bars left or right...and that's no easy task with this heavy machine. What gives?
D Scott - General Product Question posted January 13, 2018 by Michael KochQuestion:I have a Craftsman 90th anniversary lawn tractor (Craftsman model # 27398) made by Husqvarna. Will your 42 inch snow blower attachments work on this tractor? Thanks.
General Product Question posted January 22, 2016 by CHRIS VIGNOLAQuestion:Hello, I recently purchased an ST 227P snowblower with heated grips. Because of the lack of snow fall so far, I have not had to use the unit but one time but I am noticing that the heated grips don't seem to be heating the grips as they should with the switch in the "O" position. I ran it last night for at least 5 minutes just to be sure and they are definitely not getting warm. Any ideas on how I can troubleshoot this problem?
Thank you!
Mrvig- General Product Question posted January 2, 2018 by Tony MarquisQuestion:I purchased an ST230P SnowBlower and have probably 6 hours on it. The recoil is no more good. Should be simple - get a new part and get it fixed. Wait over a week for a new recoil - they send the wrong part. Go back to where I purchased it, they send me to their warranty shop - and he tells me he is not qualified to do Husqvarna warranty repairs. I am disappointed for sure. Thought I was buying a good machine , paid over $1800 and used it a few times. Try and find a number at Husqvarna to get some sort of support - can't get a number of someone that will help. Perhaps someone will email me back
Tony Marquis - General Product Question posted December 11, 2017 by Dave MacDougallQuestion:I and a friend have this same problem. Husky works good when it starts. unfortunately it is cold during snow season and unless you have a heated garage for storage starting is very iffy. With less than 6" it's much easier to just shovel it. I'll be trading in soon for whatever they will give me. Guess what make I won't even consider in the future. This has been an on-going problem since the 2nd year. I even had it refurbished last year by a husky dealer. It started good the rest of the season now back to same old problem.i use non-ethanol gas and store it according to manual recommendations. it started ok a month or so ago when it was 4o degrees but today at 20 I wasted 30 min. trying to no avail. Model st224.
I am 67 and have had a Toro, a troy-Bilt and something from Sears in my life.. All always started. None were kept in a heated space. - General Product Question posted November 26, 2017 by Allen AndrewsQuestion:I need the dimensions on the following belts - looking for the width and length in inches
532 17 90-92-----traction drive V belt
AND
532 40 80-10-----impeller drive V belt - General Product Question posted November 29, 2017 by James KellerQuestion:I recently purchased a ST 224P snowblower and couldn't register it online because the model choices in the program did not include this model despite it being shown as a product on the Husqvarna website. Looked for a phone number to call but no phone number listed either. How am I supposed to register the product?