This is a public Forum  public

Posts

  • Marc Margolis
    Bought a ST227P on 9/4/2015, I tested it the day I bought it...
    Warranty Question posted November 30, 2015 by Marc Margolis 
    Question:
    Bought a ST227P on 9/4/2015, I tested it the day I bought it and all worked fine. Yesterday I was getting it ready for the winter, checked the oil and again tested firing it up. The electric starter makes a quiet buzzing noise, but isn't starting the motor. The pull string starter fires up the engine with 1 or 2 pulls. Can you please advise what the problem and solution are.
  • Bwana Hatari
    DISAPPOINTED!!!!! ST227P Auger Belt frayed - but there is...8
    Warranty Question posted January 24, 2016 by Bwana Hatari 
    Question:
    DISAPPOINTED!!!!! ST227P Auger Belt frayed - but there is more!
    Details:

    I recently bought an ST227P snow blower and for the first time I barely finished clearing the path and the Augers stopped working. I noticed a burnt smell after a few sparks and with a little research I pin pointed that the issue was with the Auger Belt (part no: 581 83 24-01 IMPELLER BELT) having slipped off. The belt is frayed and am also suspecting some anomaly with a small broken piece of metal lodged in between the Shoulder Bolt and the Pully (ASM Engine).  I understand that belts are not covered under warranty but this is pathetic and rather disappointing. I have purchased 3 Husqvarna products in the past year and especially through this storm period, I am unable to use this expensive pile of metal. 

    What is Husqvarna doing about this? I have seen several posts on the company webpage and other forums complaining of the exact same issues. sad

    Photo:
  • Richard Schroeder
    Hello, Is there an extended warranty available for a...escalated
    Warranty Question posted December 29, 2012 by Richard Schroeder 
    Question:
    Hello,
    Is there an extended warranty available for a snowthrower model 1830HV.
    rshred@hotmail.com
  • Josh Wieman
    Hi I have a snowblower I bought one year ago. It got flooded...
    Warranty Question posted November 23, 2016 by Josh Wieman 
    Question:
    Hi I have a snowblower I bought one year ago. It got flooded last week so pulled the plug and rolled it over a few times. While pulling the plug it felt like it came out tough, didn't think too much of it. When I went to put the plug back in I spun it in about three turns by hand and then about one turn with a socket and then it went cross thread. The threads are pulled in the middle, just curious if I can do anything to get a warranty to fix or replace head?
    Photo:
  • Donald Whitbeck
    How do I register my snowblower? I followed all the...3
    Warranty Question posted February 5, 2017 by Donald Whitbeck 
    Question:
    How do I register my snowblower? I followed all the instructions including uploading a picture of my sales receipt.
    All I get is "an error occurred while saving: null.
  • Randall Zempel
    I am trying to register my new R322T Snow Thrower attachment...3
    Warranty Question posted February 18, 2017 by Randall Zempel 
    Question:
    I am trying to register my new R322T Snow Thrower attachment on the "Register Your Husqvarna Product" page, but every time I submit my info, I get "An error occurred while saving: null." What's going on, and how can I register my machine?
  • Dane miller
    i cant get a hold of any one from husqvarna i need help from...escalated
    Warranty Question posted February 20, 2013 by Dane miller 
    Question:
    i cant get a hold of any one from husqvarna i need help from them i have had my blower in shop for 2 years and is still broken i have only been able to use my machine 3 times claim number 92881821 my phone number is 9095842939 please call and find out the night mare i am going through
  • Steve Nebesni
    I have a 12527HV Snowblower. It was difficult to start from...escalated1
    Warranty Question posted December 28, 2013 by Steve Nebesni 
    Question:
    I have a 12527HV Snowblower. It was difficult to start from day 1 and I just thought it was just the way it was. Today while inspecting the machine I noticed the primer hose is broken in half. Is this a warrantied item? I purchased the machine about a year ago and only used it about 3 times. Also, the cotter pin for the auger control fell out the last time I used the machine. I currently have a paperclip holding the lever in place. Would HV be able to send me these 2 items in the mail so I can install? I do not have a vehicle capable of bringing it to a service center.

    Thanks!
  • Greg Blair
    I have a Husqvarna HU1130 STC snow thrower and to prongs for...
    Warranty Question posted October 14, 2016 by Greg Blair 
    Question:
    I have a Husqvarna HU1130 STC snow thrower and to prongs for the magneto broke off. Trying to get warranty service for the machine and when I called about warranty service the person hung up when I asked to talk to a Husqvarna rep.
    Details:

    I would like to know that Husqvarna would honor the warranty on the engine on a snow thrower sold as a Husqvarna

  • Mark Fritts
    I have a Husqvarna ST 121E. If I purchased the unit from...escalated
    Warranty Question posted October 5, 2013 by Mark Fritts 
    Question:
    I have a Husqvarna ST 121E. If I purchased the unit from Amazon.com, does this void the warranty? The stated warranty in the Owners Manual says it has a 2 year warranty. The unit was purchased 12/22/2012.