Posts
General Product Question posted July 11, 2012 by Michael SloanQuestion:Dear Answer Army,
I have a Weed Eater One 26" riding mower that has been very dependable until last week. The battery is okay and it cranks like usual, but will not fire/start. Trying the, pull starter rope, was not successful. Since it was okay last week I am hoping it might be a sensor or connection problem. I have gone through the manual, with no luck, trying to solve the no-start problem. Based on your experience, could give me some logical steps of things to check next? Bringing it to a dealer is not an option for me. Please help...
Sincerely,
MikeDetails:I serviced the mower 2 months ago. Changed the oil, new spark plug and checked the air filter. No problems starting at that time.
- General Product Question posted May 28, 2012 by Wayne KingQuestion:Do you have an e-mail address so I can contact weedeater. I have a we261 and the frame broke after only 2 years and now the clutch cable is broken.
- General Product Question posted April 5, 2012 by Dani DorsettQuestion:Does the weed eater one have a dethatcher attachment available?Photo:
- General Product Question posted January 11, 2011 by Steve ReyesQuestion:Does the weedeater one mulch the grass and if so do you sell the mulching plug for it...
- Get replacements partsescalatedGeneral Product Question posted October 8, 2012 by javier la muraQuestion:Get replacements partsDetails:Hello, i'm from Argentina and i'll be travelling to USA-MIA two weeks from today. I'm looking for some replacement parts for a Weed Eater One WE261. Can you pls tell us where we can get them and if we need to pre order them pls let us know.Below we detail the part list weneed:CHASSIS - Disc Friction ASM - 532 42 83-01DRIVE - Wheel Friction A5M - 532 42 81-06DRIVE - Tension LRV Chain - 532 43 78-41 (important part)DRIVE - Sprocket Idler - 32 43 34-95 (important part)MOWER DECK - Belt - 532 42 85-78We appreacite your answer, Thanks a lotJavier La Mura
- General Product Question posted April 18, 2012 by Perry RossQuestion:Hi. I wanted to get a weedeater one and can't find any in my area. I have a small laawn but lost my leg last year and it's hard to use a push mower now. I noticed that the prices range from $650 to $1150. I wanted to know where I can get it cheapest in my area, Wichita Falls, Texas and also wanted to know how much the mulching kit is. Money gets really tight after medical bills and not being able to work anymore, so I need the best info I can get. Thanks, Perry
- General Product Question posted August 13, 2013 by Fred EndemannQuestion:How can I ID electrical problem that prevents starting my WE261? Dealer says it started when they bypassed safety interlock system in their shop. Have tested all safety switches for continuity: brake, mower deck, seat. Dealer says there is a compression release switch that prevents starting, where is that? How to test it.
Mower suddenly would not (re)start after mowing for an hour. Battery fine. Previously usually used the pull start, with parking brake engaged, with no troubles. No visible wiring connection problems in the harness.
Should I just order a $70 replacement harness, how difficult would that be to install by myself. Any thoughts/ suggestions would be very welcome. - General Product Question posted March 28, 2011 by Steve HockleyQuestion:i am in ontario canada and am interested in purchasing a weed eater one. Your site indicates this is available at canadian tire stores but the ct web site does not list this mover. YOur site also says its available in kent stores but i dont have any near me. is there anyplace else i can get this mower near me ?
Steve - General Product Question posted July 12, 2011 by KathleenQuestion:I believe I read that the weed eater 1 rider could cut grass from 4 inches down to a couple... I see that in the heighth adjuster there are only 3 slots. The top one seems to not make any difference in height so that must be 4 inches. I need to cut my grass at 3 inches so when I drop it down to the next slot my grass is too short and gets scalded. What exactly is the height for those 3 slots. I don't want to waste gas and mow on 4 when it looks shabby afterward but i don't want my grass to burn either by going lower...Can you help?!
- General Product Question posted September 14, 2011 by Ed HeathQuestion:I bought a new "Weed Eater 1" 26" mower earlier this Summer. Unfortunately, I got it at Wal Mart in Scottsburg, IN, which means that EVERYONE THERE KNOWS NOTHING about the machine.
From the first day, the pre-assembled steering was very hard to turn. It felt as if something in the wheel assembly was too tight, and the wheel was 'bound up', or possibly lacking adequate lubrication somewhere.
I let it go for a while, thinking that it might free up with some break-in time and use. It did not, in fact it has gotten worse until I now get blisters on my hand everytime I mow, and my wife cannot use it at all.
I am sure this condition is not intended, but am not sure how to cure it. Can you tell me how to go about freeing up the steering wheel assembly so that my wife can at least use it on smooth level ground. That is now impossible.
Use 'reply', (the email address above) or write to Ed Heath, xxxx x xxxxxx xx, xxxxxxxxx, xx #####, or, call (###) ###-####,
Thank you,
Ed Heath
xx-xx@xxxxxxxxxx.com
Filter by Date
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | |||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| 31 |