Posts
General Product Question posted August 2, 2012 by Charles BaumQuestion:Re: Correct fuel:2 cycle oil mix. My 142 manual says 40:1 (3.2 oz. per gallon) but the Husqvarna 2 cycle oil bottles are 50:1 (2.6 oz. per gallon). Isn't that 40:1 wrong?- General Product Question posted September 8, 2011 by BRIAN ZIMMERMANQuestion:HELLO please all i want is for you guys at husqvana is to honor your promotion of a free chainsaw case with purchase from 9/1-10/31 all i keep getting is the run around between your cust care #18004875951 and the promotion# 18884872826 this is a simple solution honor your promotion its on your web site thank you I purchased the 450 model chain saw yesterday, went to web site to order extra chain and i see your promotion for a chain saw case-power box and scabbard
thank you for your time Brian - General Product Question posted March 3, 2014 by Jeff IbachQuestion:Just bought a t540xp and climbed with it for a week. What is the belt eyelet made out of? It seems pretty flimsy. Pleased with the saw so far.
- General Product Question posted April 13, 2012 by John MogushQuestion:I have a Husqvarna 455 Rancher chain saw with a 20 inch bar and chain. I only use the saw to cut my own firewood. Recently I experienced a no start no run problem and took it in for maintenance. Two separate dealers found a scored cylinder wall but ... Both said the saw was extremely well maintained etc. Has anyone experienced this problem. Service dealer found that the design of the air filter permitted fine saw dust to enter the air intake around the base of the filter cover and most likely caused the scoring of the cylinder wall as it let in fine particulate matter. The saw was determined to not be economically repairable. I bought the saw at Sears Roebuck.
- General Product Question posted August 18, 2011 by kenny arnoldQuestion:In comparing a Stihl 260 or 261 to a Husqvarna 346xp chain saws. Stihl uses a .325 pitch, (.063) saw chain gauge and Husqvarna uses a .325 pitch, (.058 ) gauge saw chain, Why doesn't Husqvarna use the heavier guage chain like Stihl?
- General Product Question posted June 2, 2011 by john taylorQuestion:my 235 chainsaw leaks chain oil when not in use and oil around the gasket by chain and seams like chain is to tight can here it riding on sprocket.I can pull chain from bar about 1/16 to 1/8 . Just sounds wierd when running. Thank you
- General Product Question posted December 20, 2011 by Charles BeebeQuestion:I have a 576xp husqvarna chain saw 28" bar the saw was bought in feb. of this year the problem that I am having with it is that it will not start, the last time that it ran and quit it was more than half way though the tank it just died, when the gas tank was opened it was under pressure ( it popped when opened) after that the saw would not start (the saw is getting fuel and spark ) The saw has had less than 8 fills on the tank we run two other husqvarna saw ( 350 & 455 ) on the same fuel and have no problems with them in the last 10 years of use. CharlesDetails:Beebely@yahoo.com
- General Product Question posted October 11, 2012 by joel hurwitzQuestion:where are the felling marks on a 435 chain saw, and how are they used? never had the need for them. thank you, joel
- General Product Question posted December 7, 2014 by dan o connorQuestion:hi my husqvarna 450 is giving me alot of trouble when i try to start it,the pull cord didnt retract after i pulled it,1 dealer reset for me,2 same thing happened next day.3 same thing happened again so i gave out to him about this as the saw is only 6 months old he said it was the "helper spring" and it was out of shape and that he heated it and bent it back into shape.4 a few days later i pulled the cord and it froze so he replaced the pulled cord and fly wheel but now the compression feels to tough and to hard to pull and now i cant start the saw, any ideas what the trouble is now.each trip i make to him is a 35 mile return trip.
- General Product Question posted September 4, 2014 by Greg CapesQuestion:I have a really old Husqvarna chainsaw-circa mid 80's. I only have a serial # with no model#. Serial# is 047728. I am looking for a parts & O & M manual to repair my saw. It still runs fine, but needs to have carb & seal kit, shut off switch & related tools. Please advise.
Thanks!
Greg Capes
Filter by Type
Filter by Tag
- All
- 235
- 235 e-series
- 240 e-series
- 3120 XP®
- 316 e-series
- 334T
- 338 XP® T
- 339 XP®
- 346 XP®
- 346 XP® E-TECH® TrioBrake™
- 346 XP® G
- 350
- 353G E-TECH®
- 357 XP®
- 357 XP® G
- 359
- 372 XP® W
- 385 XP®
- 385 XP® G
- 385 XP® W
- 390 XP®
- 390 XP® G
- 390 XP® W
- 395 XP®
- 395 XP® G
- 395 XP® W
- 435
- 440 e-series
- 445
- 445 e-series
- 450
- 450 50th Anniversary Edition
- 450 e-series
- 455 e-series Rancher
- 455 Rancher
- 460 Rancher
- 570
- 576 XP®
- 576 XP® AutoTune
- 576 XP® G
- 576 XP® W
- 576 XP® W AutoTune
- T435