Husqvarna: Ask & Answerpublic

Chainsaws

 
This is a public Forum  public

Posts

  • Richard Whittaker
    I just got my new Husqvarna 235e chainsaw Sunday and it...Answeredescalated2
    General Product Question posted July 5, 2011 by Richard Whittaker 
    Question:
    I just got my new Husqvarna 235e chainsaw Sunday and it doesn't start. i took it back and the guy at the store could not get it started. So I exchanged it for another one and this one did start only for a few seconds. I could not get it started again. I called customer service and was sent to southern states for someone to look it over. He had a hard time with it and could not get it started. He had to make a few adjustments and got it started. When I got it home, I tried to start it, and it does not want to start again. I have been following the directions and doing as they said to do. I can't return this one because it was the floor model. I should have to work this hard to get a chainsaw to start. Do you have anyother ideas on trying to get it started? I hope I did not waist 200.00 dollars.
  • Rick B
    Husqvarna 445 Chain oil adjustment? (see details)escalated1
    General Product Question posted September 15, 2013 by Rick B 
    Question:
    Husqvarna 445 Chain oil adjustment? (see details)
    Details:

    I just purchased a factory refurbished Husqvarna 445 chainsaw and  I am wondering how to adjust the chain oiler.  I see the adjustment symbol on the bottom of the saw, but there is not a screw as some google searches indicate.  I'm wondering if my saw is missing the adjustment screw or if I need a special tool. What I see is a black horizontal shaft with little sprocket like indentations.

  • jock reid
    using the husqvarna 3/8 file guide+ depth gauge file is...Answeredescalated2
    General Product Question posted January 10, 2012 by jock reid 
    Question:
    using the husqvarna 3/8 file guide+ depth gauge file is fine but I cannot work out how to use the depth gauge part can you help please. Saw is working fine,as I would expect from experiences with husqvarna chainsaws
    J
  • Jell Oburger
    Just bought a brand new, in the box 550xp about 2 hours ago....escalated7
    General Product Question posted November 27, 2013 by Jell Oburger 
    Question:
    Just bought a brand new, in the box 550xp about 2 hours ago. Got it home, fueled up and won't start. Won't even turn over. Checked the manual 3 times to be sure I didn't miss anything special. Pulled it about 75 times and nothing. Now I've noticed what appears to be fuel leaking form the top of the muffler baffles. What's going on? Very close to just returning the whole thing and go buy a Stihl if a new Husqvarna won't start.
    Photo:
  • jan gulden
    I own a model 435 Husqvarna chainsaw. It does not have a...Answeredescalated1
    General Product Question posted October 23, 2011 by jan gulden 
    Question:
    I own a model 435 Husqvarna chainsaw. It does not have a decompression button, When I try to start the saw the cord does not extend the correct length. Does this have to do with compression buildup? If so how do I relieve the compression so the cord will work and I can start the saw?
  • rich romaniec
    I have a Husqvarna 44 Rancher 1983 chainsaw I need the...Answeredescalated2
    General Product Question posted November 9, 2011 by rich romaniec 
    Question:
    I have a Husqvarna 44 Rancher 1983 chainsaw
    I need the operators manual and cannot find the users manual online.
    Can you please e-mail me a pdf file

    Thanks,

    rich
  • shannon erwin
    When did Husqvarna start making the T435 in China, I just...18
    General Product Question posted October 14, 2014 by shannon erwin 
    Question:
    When did Husqvarna start making the T435 in China, I just ordered one and sent it back to the dealer because it was Made in China. I am very disappointed in Husqvarna asking premium price for Made in China chainsaw
  • Bob Dore
    How do you know what size file to use?escalated
    General Product Question posted February 26, 2012 by Bob Dore 
    Question:
    How do you know what size file to use?
    Details:

    This was an answer to someone else's question. "The Husqvarna model 359 chain saw with 3/8" pitch chain uses a 7/32" file to sharpen. The 3/16" file is used on the .325 pitch saw chain." How would I know that?

     

    I have a 340 with .325 pitch and 0.050 (guage?). What size file should I use? Thank you for your help.

  • Jeff Boyd
    Husqvarna XP 2 cycle oil specificationsAnsweredescalated3
    General Product Question posted November 27, 2011 by Jeff Boyd 
    Question:
    Husqvarna XP 2 cycle oil specifications
    Details:

    I have a Rancher 445 chainsaw and an Echo string trimmer.  I use the recommended Husqvarna XP 2 cycle oil in the fuel for the chainsaw.  I would like to use the same gas/oil mixture for the string trimmer, but the instructions for the string trimmer specify 2 cycle oil that meets ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD specs.  The Husqvarna XP 2 cycle oil does not show what specs it meets.  Can you tell me if the Husqvarna XP oil meets those specs?  thank you

  • Donald Durand
    Someone asked a question in July 2010 about how to find the...Answeredescalated1
    General Product Question posted April 25, 2012 by Donald Durand 
    Question:
    Someone asked a question in July 2010 about how to find the exact manual for your OPE. I have a 455 Rancher and can see by the answer you provided where the year is in the SN, but in some cases there is more than one OM or IPL for a given year? Is the month somewhere in the PN or SN? Should I always go backwards to find the manual, never forwards?

    Given your answer in 2010 that Husqvarna was working on a better way to find manuals, I cannot understand why its not available in April 2012, almost 2 years latter?

Filter by Type

Filter by Tag

Change View

Sort