Posts
General Product Question posted August 12, 2018 by Jodee LangerQuestion:We bought a Yta24v48 in 2016. We have replaced the front link 4 times now. It literally snaps in 2. Why?!?- General Product Question posted August 10, 2018 by kathleen czechQuestion:I have a husqvarna riding mower that I am somewhat happy with. I have had nothing but continous flat front tires each week when I go to mow and at the start of each mowing season. I want to change to no flat tires but the closest I can find is a 15x6.50-6 and I need to know if this will work. Current front tires are 15x6.00-6. Please advise soonest. Thanks Kathleen
- General Product Question posted August 9, 2018 by Phil O'GuinQuestion:I have the 2654 and only problem so far is TRACTION!, It seems that the slightest incline hen grass is damp and traction is lost. Is there a better traction tire that the tires that come on it. are small chains available. I was told by a local tractor dealer that some owners where replacing stock tires atv tractor type tires. any suggestions
- General Product Question posted August 1, 2018 by Dale ClineQuestion:I have a Husqvarna GTH2448T that I'm looking for a replacement blade that's not a high lift blade. I live in Florida with sandy soil. The standard blades don't stand up. Is there a medium lift or a sand blade available. Please advise.Photo:
- General Product Question posted July 26, 2018 by Mark MaulerQuestion:Can the compact roller be used on concrete road base material?
- General Product Question posted July 21, 2018 by Deanna GagnonQuestion:Hi, I bought a new Husqvarna riding mower from Lowe's, model YTH24V54 that was delivered this past Tuesday, 7/17. Due to having to work, etc, I was not able to get to it until today, Saturday, 7/21. I have hooked up the battery, checked the oil, added gas, and have gotten it running. I can ride around on it with no issues. However, every time I pull up the PTO to engage the mower so I can begin to mow, it just stalls the mower. I did read the manual, but cannot locate what I am missing or doing wrong. Can someone help tell me what I may have missed or am doing wrong?
Thank you,
Deanna - General Product Question posted July 5, 2018 by GARRY CURTISQuestion:i recently bought an LGT48DXL with mulching kit from lowes. Everything works great except it throws way too much cut grass out the front right side of the Clear Cut deck. It gets all over the top of the deck and knee high on my right leg. My mowing height level is 6 out of 7.
I've verified the deck is level both front to back and side to side.
I've verified the tire pressure is correct
I've verified the mulching blades are level.
I've tried both slow and fast speed.
i have both level and and sloped sections of yard.
Nothing seems to make a difference.
I mow about once a week so the grass isn't too high.
I've seen the same problem documented here but no successful response.
this can't be normal.
any ideas or feedback appreciated. - General Product Question posted June 25, 2018 by Don MiningerQuestion:I have a 3 yr. old YTH24V48, and it has been quite good...until this year. I have shredded 2 deck belts this year, and I think I have found the cause. One of the idler pulleys...PN 532197379, had quite a bit of "wobble". It is mounted to the deck with a single screw...PN 817490636, which screws into a rather thin 1/8" mount, and this screw worked loose, and damaged the threads on both the screw and mount. This, IMO, is a manufacturing flaw. I got a new screw, redid the threads in the mount, and added a Nut/lock washer
to the bottom of the screw, so it will hopefully stay tight...time will tell, but ANY of the pulleys coming loose is certainly a good reason for the belt to break. - General Product Question posted June 22, 2018 by Brandon WhitmanQuestion:TS 348D clear cut deck leaving "Mohawk" in grass.Details:
Just purchased TS 348D with the clear cut deck and when cutting the grass it has been leaving a strip of grass uncut about center of the deck. I'm not mowing fast, and the blades are new. Only 7 hrs on mower. Any tips on getting this to mow with an even cut?
- General Product Question posted June 15, 2018 by Henry BobbinQuestion:I own a 24hp 48 in. Deck riding lawn tractor...recently when idling the engine goes in and out...but when deck is engaged it runs and cuts great...What happened?...What needs to be looked at?.....idle adjustment of some type?.....
Henry