H 2254 23-HP Kawasaki 54
IMG_1259 Contact between wheel and mower deck guard.
I have 29 hours on my Husqvarna Z 246 Zero turn mower. Purchased in 2016. Until this week it performed flawlessly. I cut the grass last week and then drove it into the garage and parked it. This week It will not start, the engine will not crank over. I have the steering levers in the outboard position and I'm sitting on the seat. With the key in the "on" position, the PTO switch clicks on and off normally. With the key in the "headlight" position, the head light comes on.
The battery is fully charged; if I cross the solenoid the engine will turn over with vigor so I know it is not the starter. When I turn the key to "start", I have 12.5 volts to the yellow wire on the spade terminal of the solenoid. I tested the solenoid independently and it functions correctly, i.e., (I put 12 volts to the two blade terminals on the solenoid and the engine will crank but not start).
I have tested both lever safety switches with a continuity tester and if I'm testing them correctly they seem to be good. The seat switch seems to be good when tested. I am out of options for things to test. It just doesn't make sense.
Any ideas?
S | M | T | W | T | F | S |
---|---|---|---|---|---|---|
1 | 2 | |||||
3 | 4 | 5 | 6 | 7 | 8 | 9 |
10 | 11 | 12 | 13 | 14 | 15 | 16 |
17 | 18 | 19 | 20 | 21 | 22 | 23 |
24 | 25 | 26 | 27 | 28 | 29 | 30 |
31 |